
Windsor-Severence Fire Protection District
Heavy Rescue
Production Specification
SVI #774 Page 66 of 126 April 19, 2010
One (1) Hannay EF2016-17-18 hydraulic hose reel(s) capable of storing 100' of dual line hydraulic hose. The
rewind button for each reel shall be located adjacent to the reel it controls.
- The specified hydraulic hose reel(s) shall be plumbed with one (1) TNT, model RV120, remote dump valve(s)
which will allow quick disconnection of the attached hydraulic tool from the hose mounted on reel.
- The hydraulic reel shall be equipped with 100' of TNT dual hydraulic hose. The hose shall be Yellow in color.
- The hydraulic reel shall connect to the hydraulic pump with a 36' TNT pigtail. The hose shall be Yellow in
color.
Mounting provisions for one (1) Windsor-Severance Fire Protection District supplied TNT hydraulic ram.
Mounting provisions for one (1) Windsor-Severance Fire Protection District supplied TNT hydraulic cutter.
Mounting provisions for one (1) Windsor-Severance Fire Protection District supplied TNT hydraulic spreader.
AIR HORN(S)
The air horn(s) shall be supplied and installed by the cab/chassis manufacturer.
FRONT TOW PROVISIONS
The front tow provisions shall be supplied and installed by the cab/chassis manufacturer.
EXHAUST
The exhaust system shall be as provided by cab/chassis manufacturer. No other alternation or modifications are required.
The exhaust piping and discharge outlet shall be located or shielded so as not to expose any portion of the apparatus or
equipment to excessive heating.
Exhaust pipe discharge shall be directed away from any operator’s position.
Where parts of the exhaust system are exposed so that they are likely to cause injury to operating personnel, protective
guards shall be provided.
RADIO/ANTENNA INSTALLATION
There shall be one (1) Windsor-Severance Fire Protection District supplied Motorola XTL500 radio(s) with antenna
installed in the upper right hand quadrant of the center dash panel.
Radio shall be installed per manufacturers requirements and wired for proper 12 volt power and ground.
SEAT BELT COLOR
Section 14.1.3.4 of the NFPA 1901 Standards, 2009 edition, requires all seat belt webbing in cab to be bright red or bright
orange in color, and the buckle portion of the seat belt shall be mounted on a rigid or semi rigid stalk such that the buckle
remains positioned in an accessible location.
Kommentare zu diesen Handbüchern