BENDIX BW2000 Bedienungsanleitung PDF herunterladen (Seite 35)

Attach the Actuator with new Nuts

(self-locking EN ISO 7042) and torque tighten to

133

+22

ft.lbs. (180

+30

Nm).

Connect air hose, ensuring that hoses are correctly

connected.

Make sure that hoses are not twisted and that cha-

fing is not possible.

IMPORTANT!

during maintenance work, using a soap solution to check for leakage. A 1 inch

Push park control valve in to release parking brake,

and check for leakage.

Screw in Spring Brake Release bolt to maximum

52 ft.lbs. (70 Nm).

13 Additional information

13.1 Service Video

A Video is available for additional

information.

Order number: RA-SB0002.EN Video (English)

RA-SB0002.FR Video (French)

RA-SB0002.PO Video (Portugese)

RA-SB0002.SP Video (Spanish)

13.2 Service Tool Kit ZB 9032

For service and repair work we recommend

our BendixTool Kit ZB 9032 II 37951/004EX,

which contains all the necessary special tools.

13.3 Diagnostic Equipment

For vehicles fitted with continuous

potentiometer type wear sensors,

Bendix Diagnostic Equipment may

be used to ensure quick and simple

measurement of wear at each caliper.

See sections 5.4 and 5.5.

bubble in 1 minute is acceptable, otherwise repair/replace components as necessary.

Road test vehicle before returning to service. Test any air hoses or fittings reinstalled

1 2 ... 30 31 32 33 34 35 36

Keine Kommentare

BENDIX BW2000 Bedienungsanleitung Seite 35