BENDIX TCH-001-026 Bedienungsanleitung PDF herunterladen

Technical Bulletin

Bulletin No.: PRO-01-26 Effective Date: 12/15/86 Cancels: PRO-01-26 Dated 11/28/83 Page: 1 of 5

Subject: Compressor Turbocharging

Traditionally, Bendix has permitted compressor turbocharging with certain exceptions

and limitations. Generally, original equipment installations of turbocharged compressors

have prior Bendix approval. Factors affecting approval of a specific installation include

the engine, turbocharger and compressor combination.

Compressor turbocharging becomes a concern in the Aftermarket when one of the

components of the originally approved combination is changed or when turbocharging is

considered for a previously unturbocharged compressor. For example, when a

turbocharged TuFlo 501 is changed over to a TuFlo 700.

The following can be used as a guide to determine if it is acceptable to turbocharge a

Bendix compressor in a specific application.

TURBOCHARGING

Definition

A turbocharger is a turbine driven compressor unit where the turbine is driven by the hot

gases of the engine exhaust. Its function is to increase engine efficiency and power

output by compressing air drawn through the vehicle air cleaner and directing the

compressed air into the engine intake manifold. The air pressure generated can

typically fluctuate between 30 psi and a slight vacuum, depending upon engine load.

Turbocharger outlet pressure increases as engine load increases.

A vehicle brake system compressor is turbocharged when its inlet is connected to the

outlet or PRESSURE side of the turbocharger. For example; a compressor would be

turbocharged if its inlet is connected to the intake manifold of a turbocharged engine.

1 2 3 4 5

Technical Bulletin 1

Inhaltsverzeichnis

Seite 1 - Technical Bulletin

Technical BulletinBulletin No.: PRO-01-26 Effective Date: 12/15/86 Cancels: PRO-01-26 Dated 11/28/83 Page: 1 of 5Subject: Compressor TurbochargingTrad

Seite 2

Advantages of Compressor Turbocharging1. Convenience of installation – Often the location of the compressor relative to theengine manifold allows a s

Seite 3

2. If a previously unturbocharged compressor is being turbocharged, it is recommendedthat the inlet cavity screen 238948 be installed with an inlet g

Seite 4

4. The Bendix inlet regulating valve (IRV) can be installed as an alternative to directcompressor turbocharging when it is found that turbocharger su

Seite 5

2. The following compressor crankshaft rotative speed and inlet pressure relationshipsmay not be exceeded.Maximum CompressorCrankshaft RPM Inlet Pres

Kommentare zu diesen Handbüchern

Keine Kommentare

BENDIX TCH-001-026 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Luftkompressoren BENDIX TCH-001-026 herunter. BENDIX TCH-001-026 User's Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Luftkompressoren BENDIX TCH-001-026